COMPOSITE
The main purpose of this material is the manufacture of hinged cassettes for the further facing of the facade
Without going into complicated technical descriptions, in this section we will describe what a composite is, what it needs, how it works and how much this work is about to cost.
WHAT IS COMPOSITE?
The composite is a material consisting of aluminum on both sides and a filler (polymer) between them. The thickness of the aluminum layer, depending on the brand, can vary in such sizes as 0.15 mm, 0.21 mm, 0.3 mm, 0.4 mm, 0.5 mm. The total thickness of the entire composite layer is usually 3 mm, 4 mm or 5 mm. Depending on the composition of the polymer filler, the composite is divided into combustible classes: G-1 is a low-flammable material, G-2 is a moderately burning material (filler usually white or gray) and G-4 combustible material (filler usually black). The composite is supplied in sheets usually of the following sizes: 1250x4500, 1250x5600, 1500x5600, 1220x6000 mm. The front side is covered with a protective film
WHICH COLORS WILL COMPOSITE?
Each manufacturer has its own standard color card, usually no more than 20, and the main colors are similar. But it must be remembered that even the same color from different manufacturers may differ in tint. Also, the surface of the composite may vary in degree of gloss and matt. In addition to the main monochrome colors in the palette of manufacturers there are various metallics: "silver", "gold", "bronze".
Very interesting looks of imitation of various materials, such as: scratched stainless steel, lacquered wood surface, granite, marble. Recently there were colors - chameleons, at different angles give different shades. Before using materials of unusual shades, it is necessary to clarify the possibility of their use on the street.
WHERE A ALUMINUM COMPOSITE USES?
The main purpose of this material is the manufacture of hinged cassettes for the further facing of the facade. Composite cassettes are fastened to a pre-installed subsystem of aluminum profiles. If necessary, a heater is installed.
The main advantage of this material is the ability to carry out work in the winter, the ability to revet the problematic old facades, where the classic plaster will eventually crack. Well, of course, the main advantage is the modern external curl in the final result.
WHAT CAN NOT COMPOSITE MATERIAL IN THE ADVERTISING INDUSTRY?
All of the above benefits of composite materials are undoubtedly very important. But the main thing that distinguishes this thin sheet material from others is the possibility of transforming a flat sheet into any shape. From composite materials can be made any curvilinear form - with sharp and rounded corners. This gives designers huge opportunities for creating unusual products. Complex curvilinear shapes that can not be embodied in traditional materials can easily be made of composite. The composite has become one of the main materials for the production of outdoor advertising.
HOW DO WE WORK WITH COMPOSITE?
Working with composites resembles the art of origami. When designing complex details, they are cut and made up of cardboard or paper originally on a smaller scale.
And all work on manufacture is reduced to four main stages:
• Measure and cut the desired.
• Dissolve a special cutter along the bending lines.
• Bend the sheet by milling and connect, having received the necessary detail - a cassette.
• Install the cassette on the facade.
So, let's summarize. In recent years, composite materials are gaining in popularity, because they facilitate the construction, strengthen and improve its mechanical characteristics.
The composite is widely used for the production of bulk advertising products, namely for the production of bulk letters and various shapes, therefore, the milling services are relevant.
On a milling machine the milling of a composite allows to receive qualitatively processed surfaces. Metal-plastic or wood processed by milling look in the carriers of advertising flawlessly, regardless of the complexity of the form.
The company "ROZKRIY" carries out the milling of composite in Lviv on high-tech equipment. In case of absence from the customer of a drawing executed electronically, experts will translate a sketch into the language of a clear computer.
When rendering the milling service, the price is formed on the basis of the complexity of manufacturing, material and order value.
Composite panels - a unique material, which is used as hinged ventilated facades, use it and for advertising purposes. Highly-fermented letters, numbers and other elements of advertising are the key to the production of unique advertising projects.
